Zebra Direct Printing, in conjunction with the Firefox or Chrome browser, is the alternate printer set-up for ScanPower. This printer set-up is specific to ScanPower and different from the basic Zebra set-up. 


Recommended Equipment:

Zebra ZP 450, GK 420d

30252, 30334, 30336 or 30321 Labels


Recommended Software:

Please make sure you have the correct driver for your Zebra printer.  Use the links below rather than the setup disc which came with your printer.  Sometimes updates are released after the production of printers and the disc is no longer up to date.  Also, please ensure that you do not have more than one printer driver for your printer installed as this will result in ScanPower not detecting your printer.  


Steps

1.Install QZTray 2.0 or above: https://qz.io/download/


Zebra Direct Printing is available with Firefox and Chrome.


2. Calibrate your printer: https://support.shippingeasy.com/hc/en-us/articles/206097683-How-to-Calibrate-a-Zebra-printer


Mac Setup

When installing QZ Tray on a Mac you'll need to setup a Raw driver as well. This can be a little daunting if you are not technical but we are happy to screen share with you to help with the steps.


https://qz.io/wiki/setting-up-a-raw-printer-in-osx

Restart your computer after it's set up for raw printing


Windows Setup

https://qz.io/wiki/setting-up-a-raw-printer-in-windows


Restart your computer after it's set up for raw printing


 BoxT FNSKU label printer selection:

To print FNSKU labels in BoxT install the same software as ScanPower List. The printer should be selectable from the Printer Settings: